Hyper 9 Dual In Line Motor Kit. This Kit will let you mount a single Hyper 9 in a linear configuration with a Hyper 9 dual shaft motor. This will use a lovejoy coupler to connect the two motor shafts together.
Why two motors? It's a very cost effective way to create more power. Typically a single Netgain Hyper 9 system will make about 88kW peak, so this is a great way to make around 176kW peak on a budget.
Kit contains:
Netgain Hyper 9 120v Single shaft motor w/ SME ACX1 Inverter
Netgain Hyper 9 120v Dual shaft motor w/ SME ACX1 Inverter
SME ACX1 Inverter
Billet Aluminum Adapter Plate
Lovejoy Coupler
Motor Face: B-Face (Warp Compatible)
Motor Diameter: 9.0 Inches
Motor Case Length: 33.50 Inches
Motor Type: Permanent Magnet Synchronous Reluctance AC
Weight: 250 lbs
Max Voltage Input: 132
Terminal Stud Size: M8 Inch
Integrated Sensors: Encoder and Temperature
Rated Torque: 340 Lb Ft
Rated Power: 240 HP
Max RPM: 8,000
RPM Sensor: Yes
Drive End Shaft: 1-1/8 Inch with 1/4 Inch Keyway
Max Efficiency: 0.94
Thermal Cooling: External Heatsink
Max Temperature: 150 Degrees Celsius
Matching Controller Included In Price:
Note: Due to the excessive weight of motors additional freight charges apply.
Warranty Period: 2 Years
NOTE: when using this adapter with a Netgain Hyper 9 motor you must install a Hyper 9 spacer ring before installing the motor shaft coupler. When purchasing your system through EV West one is included with the motor.
Flywheel to Shaft Coupler (M10) Steel: 28 lb/ft
Motor to Motor Adapter Plate (3/8) Aluminum: 15 lb/ft
